Help Center

Knowledgebase : Product Tips & Information > Polishing Information
Polishing Flow Chart Material Ready For PolishFlow Chart for Polishing Stainless Steel Pipe and TubeUse 120 Grit ZirconiumUse 80 Grit ZirconiumAre defects removed?NOAre there defects in the surface?Are there deep blemishes?Use 50 Grit CeramicDo you want a...
_AUTOMATIC TUBE POLISHER_ WAGNER ADDS AUTOMATIC TUBE POLISHER FOR CIRCUMFERENTIAL FINISHING New polishing machine providesconsistent finish of polished material and shortened lead times. The Wagner Companies has added a long length automatic tube p...
_POLISHING TIPS FROM KANE BEHLING_ I have been asked to share some metal polishing tips that I have picked up over my many years of experience in the field. First of all metal polishing is not rocket science. Anyone with access to some abrasives ca...
_MECHANICAL FINISH DESIGNATIONS_ #3 FINISH -- ALSO CALLED GRINDING, ROUGHING OR ROUGH GRINDING These finishes are coarse in nature and usually are a preliminary finish applied before manufacturing. An example would be grinding gates off of castings, ...
FOR ROUND TUBE, PIPE OR BAR THAT REQUIRES A BRUSHED SATIN FINISH. _Note: When polishing, be sure to wear proper safety attire including a dust mask and safety glasses_. * Grind out any welds and any deep gouges in the material. Always be careful not t...